What Is the Difference Between DWDM and CWDM Optical Technologies?

Posted on by Fiberstore

There are several differences between DWDM multiplexer and CWDM multiplexersystems. CWDM systemsare older and cannot fit as many data streams. CWDM systems, however, are also less expensive from the outset. The design, function and purpose also differ in terms of transmissionlength and distance.
When dealing with fiber optic transmission systems, there are two main types of wavelength division multiplexing, or WDM, systems used to transmit the necessary data: DWDM and CWDM. Coarse wavelength division multiplexing systems, or CWDM systems, are used when there are eight orfewer wavelengths in each fiber that are active. Dense wavelength division multiplexing systems, or DWDM systems, are used when there are eightor greater wavelengths active in each fiber.
Dense wavelength division multiplying systems can fit more than 40 different data streams in the same amount of fiber used for two data streams in a CWDM system. CWDM systems were invented prior to dense wavelength systems, because the cost of cabling was a major factor. Now thatcabling and transmittal has become more affordable, DWDM
systems are often used in place of CWDM systems. One other major difference is that wavelength systems define CWDM systems, while DWDM systems are defined by frequencies.
CWDM systems can perform many of the same tasks as a dense wavelength system, at a lesser initial cost. Despite the lower transmittal of data through a CWDM system, these are still viable options for fiber optic data transmittal. CWDM systems carry less data, but the cabling used to run them is less expensive and less complex. A DWDM system has much denser cabling and can carry a significantly larger amount of data, but it can be cost prohibitive, especially where there is a need for a large amount of cabling in an application.
Another major difference between the two is that DWDM multiplexing systems are made for longer haul transmittal, by keeping the wavelengths tightly packed. They can transmit more data over a significantly larger run of cable with less interference than a comparable CWDM system. If the need is there to transmit the data over a very long range, the dense system solution will likely be the best in terms of functionality of the data transmittal as well as the lessened interference over the longer distances that the wavelengths must travel.
CWDM cannot travel long distances because the wavelengths are not amplified, and therefore CWDM is limited in its functionality over longer distances. Typically, CWDM can travel anywhere up to about 100 miles (160 km), while an amplified dense wavelength system can go much further as the signal strength is boosted periodically throughout the run. As a result of the additional cost required to provide signal amplification, the CWDM solution is best for short runs that do not have mission critical data.
There are several differences between DWDM and CWDM systems. CWDM systems are older and cannot fit as many data streams. CWDM systems, however, are also less expensive from the outset. The design, function and purpose also differ in terms of transmission length and distance.
When dealing with fiber optic transmission systems, there are two main types of wavelength division multiplexing, or WDM, systems used to transmit the necessary data: DWDM and CWDM. Coarse wavelength division multiplexing systems, or CWDM systems, are used when there are eight or fewer wavelengths in each fiber that are active. Dense wavelength division multiplexing systems, or DWDM systems, are used when there are eight or greater wavelengths active in each fiber.
Dense wavelength division multiplying systems can fit more than 40 different data streams in the same amount of fiber used for two data streams in a CWDM system. CWDM systems were invented prior to dense wavelength systems, because the cost of cabling was a major factor. Now that cabling and transmittal has become more affordable, DWDM systems are often used in place of CWDM systems. One other major difference is that wavelength systems define CWDM systems, while DWDM systems are defined by frequencies.
CWDM systems can perform many of the same tasks as a dense wavelength system, at a lesser initial cost. Despite the lower transmittal of data through a CWDM system, these are still viable options for fiber optic data transmittal. CWDM systems carry less data, but the cabling used to run them is less expensive and less complex. A DWDM system has much denser cabling and can carry a significantly larger amount of data, but it can be cost prohibitive, especially where there is a need for a large amount of cabling in an application.
Another major difference between the two is that DWDM multiplexing systems are made for longer haul transmittal, by keeping the wavelengths tightly packed. They can transmit more data over a significantly larger run of cable with less interference than a comparable CWDM system. If the need is there to transmit the data over a very long range, the dense system solution will likely be the best in terms of functionality of the data transmittal as well as the lessened interference over the longer distances that the wavelengths must travel.
CWDM cannot travel long distances because the wavelengths are not amplified, and therefore CWDM is limited in its functionality over longer distances. Typically, CWDM can travel anywhere up to about 100 miles (160 km), while an amplified dense wavelength system can go much further as the signal strength is boosted periodically throughout the run. As a result of the additional cost required to provide signal amplification, the CWDM solution is best for short runs that do not have mission critical data.
What’s more, something about the products.CWDM Mux/Demux module- CWDM MUXand CWDM Demux are designed to multiplex multiple CWDM channels into one or two fibers. The core of CWDM Module application is the passive MUX DEMUX unit. The common configuration is 1×4, 1×8, 1×16 channels. Available in 19″ Rack Mount or LGX module package. Optional wide band port for existing 1310nm or 1550nm port is available to multiplex with these CWDM Channels.
And DWDM Mux/Demux Modules – DWDM Mux and DWDM DeMux are designed to multiplex DWDM channels into one or two fibers. The common configuration is 4, 8, 16 and 32 channels. These modules passively multiplex the optical signal outputs from 4 or more electronic devices, send them over a single optical fiber and then de-multiplex the signals into separate, distinct signals for input into electronic devices at the other end of the fiber optic link
Fiberstore has all kinds of these products, if you want to know more,please pay more attention to our company, you can have what you want with confidence.

About Fiberstore

Fiberstore provides the most cost-effective Customizable Fiber Network Solutions worldwide. As one of the industry's fastest growing fiber optic equipment manufacturers, Fiberstore specializes in providing high quality, cost-effective retailing, wholesale and custom service with wide various partners worldwide. You can get integrated optical network solutions of optical fiber cables, fiber transceivers, WDM network building blocks, patch cables & other devices here. Read More>>

Follow us on Google+
Recent Posts
Recent Posts
Calendar
October 2014
S M T W T F S
« Sep    
 1234
567891011
12131415161718
19202122232425
262728293031